Safety Issues - Linak Deskline DL20 IC User Manual

Furthermore take care about the connecting wires from the power supply to the
DL20 IC / DL21 IC system, don't damage this by overrun.
Assure free space for movement of the application in both directions to avoid
blockades.
The appliance is only to be used with the power supply unit provided with
the appliance.

Safety issues

The builder of the equipment shall ensure that the use of the component
complies with relevant standards – like the Machine Directive. Care must be
taken to avoid squeezing of cables as it can cause movement of the system!
The SMPS001 / SMPS002 / SMPS006 must not be packed in heat insulating
material, but must be placed so that it can emit waste heat to the surroundings.
There are no ventilation holes to consider, the SMPS emits heat through its
surface.
Only the power supply type SMPS001, SMPS002 or SMPS006, shall be used
with the system.
Page 6 of 32