Misc. On The Deskline ® Dl20 Ic/Dl21 Ic System; Warranty; Maintenance; Cleaning The Desk Panel - Linak Deskline DL20 IC User Manual

Misc. on the DESKLINE
This system is a DESKLINE system developed for desks applications ranging from industry to office desks and for indoor use. Do
not use it in industrial kitchens or in other enviroments that have to be cleaned with aggressive detergents.
Do not bolt the legs to the floor so that free movement is prevented. This could cause serious damage to the legs in fault
situations.

Warranty

This DESKLINE product is subject to warranty pursuant to the terms of LINAK DESKLINE Warranty Paper, available on the LINAK
website www.linak.com/warranty.

Maintenance

Clean dust and dirt from the outside of the system at appropriate intervals and inspect for damage and breaks.
Inspect connections, cables, and plugs without disconnecting, and check functioning as well as fixing points.

Cleaning the desk panel

Clean your desk panel with a soft damp cloth. Universal cleaning detergents may be used.
For disinfection of the desk panel, use a 70 percent isopropyl alcohol either as a wipe or add a small amount to a soft cloth.
The desk panel is not a sealed unit and there are electronics inside it.
If liquids or moisture enter an opening, the PCB may be damaged, and the desk panel ruined.
Thus:
• Avoid moisture penetrating any openings as this may damage the PCB inside the desk panel
• Avoid spraying the cleaning agent or disinfectant directly on the desk panel as moisture may
penetrate openings damaging the PCB inside the desk panel
• Cleaning agents and disinfectants must not be highly alkaline or acidic (pH value must be 6 to 8),
and they must not contain bleach or chlorine
• Do not use hand sanitizer gel as a cleaning agent
DL20 IC / DL21 IC system
®
Page 12 of 32