3.2.3
See also
ARM DUI 0481D
ID071311
All connectors are keyed to prevent incorrect connections.
3.
Power-up the target hardware and power-up the DSTREAM unit.
4.
Configure the IP address on a debug hardware unit using the installed ConfigIP utility.
This enables you to access your unit by Ethernet. (You do not need to do this if you are
using a USB connection).
Concepts
•
Requirements for connecting the DSTREAM unit on page 3-2
•
Hot-plugging and unplugging the debug cable on page 3-5
•
Tracing with DSTREAM on page
Reference
ARM
DSTREAM
and RVI
®
™
•
Using Trace,
../com.arm.doc.dui0498d/I999867.html
•
Configuring the network settings for a debug hardware unit,
../com.arm.doc.dui0498d/BGBHAIGH.html
•
Connecting to a debug hardware unit,
Copyright © 2010-2011 ARM. All rights reserved.
Non-Confidential
System requirements for using ARM DSTREAM
3-6.
Using the Debug Hardware Configuration Utilities:
™
../com.arm.doc.dui0498d/Ciagaiec.html
.
3-4