Service And Maintenance Intervals; 10 Hours Service - Cyclone Filter - Hardi NAVIGATOR 3000 Instruction Book

Service and Maintenance intervals

10 hours service - Cyclone filter

To service the Cyclone filter:
1. Close the suction valve and turn the pressure SmartValve to "Main
tank" or an unused function.
2. Unscrew filter lid (A).
3. Lift the lid and filter (B) from housing.
4. Separate filter from the integrated filter guide in the lid and clean
the filter.
To reassemble:
1. Grease the two O-rings on the lid/filter guide. Due to small space
at lid, for example, use a brush to grease with.
2. Mount the filter onto the recess (which may not be greased) in the
lid/filter guide.
3. Place the filter/filter lid into housing and screw the lid until it hits
the stop.
€
DANGER! Suction valve must always be closed and the pressure SmartValve to "Main tank" before opening the
Cyclone filter! If not then spraying liquid can hit you when opening the filter and drain the main tank content!
±
WARNING! Always wear protective clothing and gloves before opening the filter!
6 - Maintenance
6.3