Turbofiller Rinsing; Quick Reference - Operation - Hardi NAVIGATOR 3000 Instruction Book

Hide thumbs Also See for NAVIGATOR 3000:

Table of Contents

5 - Operation

TurboFiller rinsing

Rinsing the TurboFiller and chemical containers are done in the

following two ways:

When TurboFiller lid is open: For cleaning empty containers. Put

container over the rotating flushing nozzle in the middle of the

TurboFiller so that the nozzle is inside the container. Press the Chemical

Container Cleaning lever and TurboFiller suction valve at the same time

to activate the flushing nozzle in the middle of the TurboFiller and

empty out the TurboFiller rinsing liquid.

When TurboFiller lid is closed: Use the Chemical Container Cleaning lever to rinse the hopper after filling of chemicals has

ended. Press the Chemical Container Cleaning lever and TurboFiller suction valve at the same time to activate the flushing

nozzle in the middle of the TurboFiller and empty out the TurboFiller rinsing liquid. Do this 3 times and after last flushing,

then open lid to inspect if the TurboFiller is empty. If not, then close lid again and press TurboFiller suction valve until the

TurboFiller is empty.

In the following diagram, handle positions for different options are described.

*designates an optional function.

5.10

Table of Contents

Do you have a question about the NAVIGATOR 3000 and is the answer not in the manual?

Navigator 3500 Navigator 4000