Preparing The Sprayer For Use After Storage - Hardi NAVIGATOR 3000 Instruction Book

Preparing the sprayer for use after storage

After a storage period, the sprayer should be prepared for the next season the following way:
1. Remove the cover.
2. Remove the support from the wheel axle and adjust the tire pressure.
3. Wipe off the grease from hydraulic ram piston rods.
4. Fit the pressure gauges again. Seal with Teflon tape.
5. Connect the sprayer to the tractor including hydraulics and electrics.
6. Check all hydraulic and electric functions.
7. Empty the tank of remaining anti-freeze.
8. Rinse the entire liquid circuit on the sprayer with clean water.
9. Fill with clean water and check all functions.
6 - Maintenance
6.21