Port Config (Port Configuration); Figure 3-5 Port Configuration Submenus; Table 3-A Port Configuration Parameters - ADTRAN FXO+ DUAL VOICE User Manual

Port Config (Port Configuration)

2)CONFIG
MENU ITEM
MODE
RX LVL (TLP)
TX LVL (TLP)
FAULT RESP
*Factory Default
61200.103L2-1
Port Configuration, a submenu of TSU 100/120/600
main menu item Configuration, is used to configure the
FXO+ option module. The submenu items shown in
Figure 3-5 are used to configure the parameters.
7)PORT CONFIG
The unit displays the first of seven submenu items.
Table 3-A identifies the available selections for Port
Configuration. Continue with standard operating
procedures.
FXS-LS, FXO-GS, FXO-LSMW, DPT
--8 dB --> 0 dB, 1 dB steps *(--3 dB)
0 dB -->+8 dB, 1 dB steps *(+3 dB)
*Normal, Seized
FXO+ Dual Voice Option Module User Manual
1)MODE
1.2 FXO+
2)RX LVL (TLP)
3)TX LVL (TLP)
4)FAULT RESP
Port Configuration Submenus
Port Configuration Parameters
PARAMETER CHOICES
Chapter 3. Operation
Figure 3-5
Table 3-A
5