Delete A Self-Defined View; Saving Xgpon Test Results - Viavi SmartClass OLP-87 Operating Manual

OLP-87/OLP-87P
The new self defined view is displayed.

Delete a self-defined view

The XGPON screen is displayed.
I
[A]
1. Press the key.
2. Tap the [More] button.
3. Tap the [Edit Views]
The view table is displayed.

[A]
4. Press the key.
5. Tap the [View] button.
6. To set a view, tap on the desired view.
The desired view is displayed.
[A]
7. Press the key.
8. Tap the [Delete View]
Delete View message is displayed.
9. To delete the view, tap the
10.To exit from the menu press the
To delete a selected self-defined view:
The view to be deleted is selected.
I
[A]
1. Press the key.
2. Tap the [More] button.
3. Tap the [Edit Views]
The  view table is displayed.
[A]
4. Press the key.
5. Tap the [Delete View]
Delete View message is displayed.
6. To delete the view, tap the
7. To exit from the menu press the

Saving XGPON test results

Before starting a measurement a project must be selected and
set to active. Thus, all results are assigned to that project when
saved. If no project was defined by the user, the instrument will
use the Test-Tool project "default", which is always present (see
"Managing projects" on page 39).
Results are stored simply by pressing the
key is pressed, the result just displayed will be saved.
D
button.
button.
[OK] button.
[F]
key.
button.
button.
[OK] button.
[F]
key.
[G]
7 XGPON O
PERATION
-
ELETE A SELF DEFINED VIEW
key. Each time the
51