NOTE:
OLP-87/OLP-87P
The changes are immediately effective.
[F]
3.
Press the
button to close the edit menu.
Deleting a project
1.
Select the project you wish to delete.
[A]
2.
Press the
key and tap [Remove].
3.
Tap
[Yes]
to permanently delete the project.
The project is deleted and removed from the list.
Activating a project
To assign measurements to a project, the project must be
activated. There can always be only one active project.
1.
Select the project you wish to activate.
2.
Tap the
button.
– or –
[A]
Press the
key and tap [Set Active].
Allow a few seconds until the label ACTIVE is displayed at the
selected project.
Savings of measurement results are assigned to the selected
project.
5 M
ANAGING PROJECTS
D
ELETING A PROJECT
41