Displaying Absolute Power Level; Pass/Fail Measurement - Viavi SmartClass OLP-87 Operating Manual

OLP-87/OLP-87P

Displaying absolute power level

The power level is displayed in dBm or Watts (nW, μW, mW) in
absolute power level mode.
Fig. 17 dBm view in absolute power level
The PONmeter screen is displayed.
I
[A]
1. Press the key.
2. To toggle between the display modes, tap the [dBm/Watt],
[dB] or [Pass/Fail]
– or –
To toggle between the display modes, tap the power level in
PONmeter mode.

Pass/Fail measurement

The Pass/Fail function allows you to quantify measurement
results very quickly. You must set the thresholds before you
select the Pass/Fail function.
OLP-87/OLP-87P threshold levels
The "Over", "Pass" and "Warn" threshold levels are used to sort
measurement results into 4 categories:
D
ISPLAYING ABSOLUTE POWER LEVEL
button.
6 PON O
METER PERATION
43