Selecting And Changing The Power Display Mode - Viavi SmartClass OLP-87 Operating Manual

OLP-87/OLP-87P
The menu opens:
2. Tap the [Auto button to switch Auto

The checkmark is set or removed.
Displaying modulated signals
The OLP-87/OLP-87P automatically detects the modulation
frequency of light signals modulated at the fixed frequencies of
270 Hz, 1 kHz, and 2 kHz. The detected frequency is shown in
the lower right measurement display pane.
Selecting and changing the power display
mode
The OLP-87/OLP-87P provides following display modes:
• absolute power level in dBm or Watt
• power level in dB relatively to a reference value
• Pass/Fail indication based on a limit
9 B
S
ELECTING AND CHANGING THE POWER DISPLAY MODE
 mode on/off.
O
ROADBAND PERATION
67