NOTE
The file is saved automatically by default in a folder with the Job Id parame-
ter.
Example: if the Job Id is defined with Test Fiber 1, the folder is named Test
Fiber 1.
3
Once the recording information are defined as wished, select the saving mode
wished:
–
–
–
Results display
The traces acquired or recalled from a memory are displayed on the Results page.
According to the mode of acquisition (Expert OTDR or SmartTEST), the results page
offers similar functions, but also different functions.
Smart Link view
Once the results trace is displayed, click on Smart Link key to display the Smart Link
view.
NOTE
The SmartLink view is displayed by default after an acquisition in Smart-
TEST.
At the end of the acquisition, a pop up window displays the overall test resuls.
Tap this window to close it.
Chapter 3 Launching a reflectometry test and displaying results
Click on FILE ONLY
.sor format
Click on FILE + PDF
generate a pdf report of the results.
Click on Results
User Manual
to save exclusively the results trace to the
to save the results trace in a .sor file and to
to return to Smart Test result view.
700MAN201 Rev. 002
Results display
49