7 XGPON O
PERATION
G
ENERAL INFORMATION
7
XGPON O
50
PERATION
General information
The operation of the XGPON application is almost the same as
the description of the PONmeter application (see
Operation" on page
additional wavelength options for references and threshold sets.
Therefore, only the additional menus of the XGPON application
are described in detail in the following.
Select a predefined XGPON view
The homescreen is displayed.
I
1.
Tap the
[XGPON]
[A]
2.
Press the
key.
3.
Tap the
[View]
button.
4.
To set a view, tap on the desired view.
– or –
To select a view, press the arrow keys to highlight an item and
press the center key within the arrow keys to confirm.
Create a self-defined view
The standard predefined views cannot be changed or deleted.
The XGPON screen is displayed.
I
[A]
1.
Press the
key.
2.
Tap the
[More]
button.
3.
Tap the [Edit
Views]
The
view table is displayed.
[A]
4.
Press the
key.
5.
Tap the [Save View
The VIEW NAME menu is displayed.
6.
Type in the view name.
7.
To save the view, tap the
8.
To edit the preselected wavelength and set/remove the
checkmark, press the center key within the arrow keys.
– or –
Tap the desired wavelength value twice.
[F]
9.
Press the
key.
42). The XGPON application differs by
button.
button.
as]
button.
[OK]
button.
"PONmeter
OLP-87/OLP-87P