Saving Broadband Test Results - Viavi SmartClass OLP-87 Operating Manual

OLP-87/OLP-87P
1. Tap on the left side of the touchscreen.
The Reference edit mode is displayed.
2. Type in the desired value.
3. Tap the [OK] button.
For other wavelengths, repeat steps 1 through 3 as required.
J
To edit the reference level in the More menu:
The Powermeter screen is displayed.
I
[A]
1. Press the key.
2. Tap the [Reference]
The Reference edit mode is displayed.
3. Type in the desired value.
4. Tap the [OK] button.
For other wavelengths, repeat steps 1 through 4 as required.
J

Saving Broadband test results

Before starting a measurement a project must be selected and
set to active. Thus, all results are assigned to that project when
saved. If no project was defined by the user, the instrument will
use the Test-Tool project "default", which is always present (see
"Managing projects" on page 39).
Results are stored simply by pressing the
key is pressed, the result just displayed will be saved.
To save current results:
The instrument is in application mode and displays the test
I
results (overview or details) to be stored.
[G]
1. Press the key.
The Save dialog is displayed.
S
AVING
button.
[G]
9 B O
ROADBAND PERATION
B
ROADBAND TEST RESULTS
key. Each time the
69