Chapter 2 Utilities
Using a PC keyboard
After you have connected to the OneExpert from a PC using the VNC viewer, you can use
the computer's mouse or keyboard to control the OneExpert.
The following table shows how the PC keys map to the OneExpert keypad.
PC key
Escape
VNC availability
In Ethernet, you can do a ping, trace route, and similar data tests, but you cannot change
any data settings.
Ending a remote operation session
To end a remote operation session, either exit the VNC session on the PC or app, or turn the
OneExpert off and then on again (power cycle).
70
OneExpert key
F1–F4
Correspond to the OneExpert system keys
F5
Home
F6
Tray menu
F7
AutoTest
Cancel
Enter
OK
ONX-220 User's Guide
22135173, Rev. 000
June 2020