VeriFone VX 520 User Manual page 31

7. Pre-authorisation Completion*
STEP 1
Press # for the transaction list and select 'pre-authorisation completion'
STEP 2
Enter the pre-authorisation completion amount and press enter
STEP 3
Enter the tip amount and press enter
STEP 4
Enter supervisor ID and press enter
STEP 5
Enter supervisor PIN and press enter
STEP 6
Enter a valid waiter ID and press enter
STEP 7
Enter the table number and press enter
Enter the authorisation code** found on the customer's receipt; this
STEP 8
code cannot contain any special characters (,.-+#*) or blanks
Pass the POS device to the customer who can either insert or swipe his or
STEP 9
her card (the card must be the same card as the original pre-authorisation)
If prompted, the customer must enter his or her PIN followed by enter
STEP 10
STEP 11
Wait for the authorisation response
Once the transaction is approved, the POS device will print a customer and
STEP 12
merchant copy of the receipt
The POS device will return to the idle screen
STEP 13
31