Change Pressure Measuring Hose; Disposal - Weinmann VENTIlogic BiLevel ST Description Of Unit And Operating Instructions For Patients

Bacteria filter
If bacteria filter WM 24148 is used, change the particle filter in the bacteria filter in
accordance with the relevant operating instructions.

9.3 Change pressure measuring hose

Adapter
Sleeve
Pressure measuring hose

9.4 Disposal

42
EN
Maintenance
1. Detach the sleeve on the creased hose from the
adapter .
2. Remove the pressure measuring hose from the
creased hose.
3. Remove the pressure measuring hose from the
adapter.
4. Fit the new pressure measuring hose to the adapt-
er.
5. Hold up the creased hose and insert the free end
of the new pressure measuring hose.
6. Slide the sleeve of the creased hose onto the
adapter.
7. Dispose of the old pressure measuring hose.
Device
Do not dispose of the unit with domestic waste. To dis-
pose of the unit properly, please contact a licensed,
certified electronic scrap disposal merchant. This ad-
dress is available from your Environment Officer or
from your local authority.