Alarms - Weinmann VENTIlogic BiLevel ST Description Of Unit And Operating Instructions For Patients

Home ventilation unit
Table of Contents

Advertisement

Malfunction/Error
message
Battery discharged
Clock not set
Service indicator
illuminated
If there are any faults which cannot be rectified immediately, contact the manufactur-
er (WEINMANN) or your dealer immediately to have the unit repaired. Do not con-
tinue using the unit to avoid causing greater damage.

8.2 Alarms

A distinction is made between two types of alarm on the VENTIlogic:
low-priority alarms, indicated by the symbol
dow, a
(buzzer).
medium-priority alarms, indicated by the symbol
alarm window, a
alarm (buzzer).
There are no so-called "high-priority alarms" on the VENTIlogic, as this unit may not
be used for life-support ventilation.
Silence alarms
The acoustic alarm of the physiological alarms V
by your doctor (
message appears in the display and the yellow status indicator is continuously on.
34
EN
Troubleshooting
Cause
Internal battery
empty.
Internal clock not set.
yellow status indicator and an acoustic alarm
continuous
flashing
symbol in the status line). In this event, only the relevant alarm
Press alarm acknowledgement switch,
Battery must be changed by
WEINMANN or a dealer to make sure
that therapy is recorded correctly.
Press alarm ackknowledgement switch,
clock must be set by your doctor to make
sure therapy is recorded correctly.
Unit must be serviced by WEINMANN
or a dealer as soon as possible.
yellow status indicator and an acoustic
and IPAP
Tmin
Rectification
in the alarm win-
in the
can be deactivated
min

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm 27000

Table of Contents