Battery - HERO XPULSE 200 PROGRAMMED FI Manual

BATTERY

Refer to the safety precautions on (page 44).
Location
The battery is located behind the left
side cover.
Specification
*MF Battery-12V-6 Ah/ETZ-7
It is not necessary to check the battery
electrolyte level or add distilled water as the
battery is a Maintenance-Free (sealed)
type. If your battery seems weak and/or
electrolyte is leaking (causing hard starting or
other electrical troubles), contact your
Authorised
Hero MotoCorp
This symbol on the battery means that
this product must not be treated as
household waste.
This symbol on the battery means the
old battery must be returned to your
Authorised
as it must be treated as recyclable
material.
Battery is a maintenance-free (sealed) type
•
and can be permanently damaged if the
sealing strip is removed.
An improperly disposed battery can be
•
harmful to the environment and human
health. Always confirm local regulations for
battery disposal.
*MF stands for Maintenance Free
workshop.
NOTE
workshop
Hero MotoCorp
Battery charging
Always visit your Authorised
workshop if you see any symptom of battery
discharge as earliest as possible to get the
battery charged. The battery has a tendency to
discharge rapidly if additional electrical
accessories are fitted on the vehicle.
Battery storage
If in case your vehicle is not used for more
•
than a month remove the battery, fully
charge and store in a cool and dry place.
If the battery is expected to be stored for
Ÿ
more than two months, ensure to fully
charge the battery once in a month.
Always ensure the battery is fully charged
Ÿ
before installation.
Ensure the battery leads are properly
Ÿ
connected to the battery terminals during
installation.
Battery removal
Make sure the ignition switch is "OFF" ( ).
•
Remove the seat (page 35).
•
Remove the right side cover screws (1), side
•
cover (2) by releasing the lug from the
grommet (3) and slide the cover towards
the rear to release tab from the slot (4).
69
Hero MotoCorp