HERO XPULSE 200 PROGRAMMED FI Manual page 57

6
(5) Air cleaner cover screws
(6) Air cleaner cover
7
(7) Air cleaner element (8) Air cleaner housing
Air cleaner element cleaning
•
Clean the element by tapping it gently to
•
loosen dust.
Blow away the remaining dust by forcing
•
compressed moisture-free air using an air
nozzle (9) from the housing side (10) of
the air cleaner.
Replace the air cleaner element if it is
•
excessively dirty, torn or damaged.
5
8
(9) Air nozzle
! !
Never wash the air cleaner element. Only
•
blow air in the air cleaner element for
cleaning dust, as explained. Replace air
cleaner element once in every 12000 km.
Replace it earlier if it becomes very dirty,
•
damaged on surface or on the sealing area.
Install the air cleaner element.
•
Install the air cleaner cover.
•
Install the right side cover.
•
(page 35
Install the seat
•
Air cleaner drain tube cleaning
Remove the drain tube (1) and drain the
deposit into a container.
Follow the above process more frequently
when riding in rain or at full throttle.
Always ensure to reinstall the drain tube after
draining the deposit.
53
9 10
(10) Housing side
CAUTION
).
NOTE