HERO XPULSE 200 PROGRAMMED FI Manual page 71

1
(1) Air pressure gauge
! !
Over inflation/Under inflation will affect the
performance.
Inspection
Whenever you check the tyre pressure, you
should also examine tyre treads & side walls
for wear, damage & foreign objects:
Look for :
Bumps or bulges in the side of the tyre or
Ÿ
the tread. Replace the tyre if you find any
bumps or bulges.
Cuts, splits or cracks in the tyre. Replace the
Ÿ
tyre if you can see fabric or cord.
CAUTION
Excessive tread wear.
•
Carefully inspect the tyres for any damage,
•
if the vehicle hits a pothole or hard object.
Tread wear
Replace tyres immediately when the tyres get
worn upto the wear indicator (1) on the tyre.
The tread limits are :
MINIMUM TREAD DEPTH:
Front:1.0 mm
67
Rear: 1.0 mm