Nut, Bolts & Fasteners; Battery - HERO XPULSE 200T PROGRAMMED FI Manual

The imported tyre(s) if fitted without ISI mark;
are in compliance of BIS standard and Central
Motor Vehicle Rules 1989, as declared by the
Tyre manufacturer.
Important safety reminders
Do not install a tube inside a tubeless tyre on
•
this vehicle. Excessive heat buildup can
cause the tube to burst.
Use only tubeless tyres on this vehicle. The
•
rims are designed for tubeless tyres, and
during hard acceleration or braking, a tube-
type tyre could slip on the rim and cause the
tyre to rapidly deflate.
NUTS, BOLTS & FASTENERS
Tighten bolts and nuts at regular interval
•
shown in the maintenance schedule.
Check that all chassis nuts and bolts are
•
tightened to correct torque values.
Check that all cotter pins, safety clips, hose
•
clamps and cable stays are in place.
NOTE

BATTERY

Refer to the safety precautions on (page 42).
Location
The battery is located behind the left
side cover.
Specification
*MF Battery-12V-6Ah/ETZ-7
It is not necessary to check the battery
electrolyte level or add distilled water as the
battery is a Maintenance-Free (sealed)
type. If your battery seems weak and/or
electrolyte is leaking (causing hard starting or
other electrical troubles), contact your
Authorised
Hero MotoCorp
This symbol on the battery means that
this product must not be treated as
household waste.
This symbol on the battery means the
old battery must be returned to your
Authorised
as it must be treated as recyclable
material.
Battery is a maintenance-free (sealed) type
•
and can be permanently damaged if the
sealing strip is removed.
An improperly disposed battery can be
•
harmful to the environment and human
health. Always confirm local regulations for
battery disposal.
*MF stands for Maintenance Free
68
workshop.
NOTE
workshop
Hero MotoCorp