Table of Contents
Advertisement
4.0 Operation
Fig. 15.
Fig. 16.
Fig. 17.
Fig. 18.
Fig. 19.
16
4.3.3.8
Using the DDS splash protector
Insert the DDS splash protector into the inner part of the
DDS secretion canister lid (see fig. 12).
4.3.3.9
Attach DDS secretion canister lid
• With the DDS secretion canister on a firm surface,
position the lid horizontally on top. The lid may not be
twisted (see fig. 16)!
• Press it tightly with both hands as far as it will go onto the
canister.
4.3.3.10 Remove DDS secretion canister lid
With one hand on the canister handle lift the complete
canister upwards. With the other hand on the canister base
guide the canister in order to prevent it from tilting when
lifting it out. Press the lever apart (see fig. 18).
Unhinge the snap-in hook of the canister handle at the
canister. Pull out the snap-in hook with both hands and
remove the canister handle upwards. Remove bacterial
filter/ oversuction stop from the canister handle.
Remove the canister lid from the canister with both hands.
Remove the splash protection.
4.3.3.11 Insert / Remove DDS hose adapter
• Press the required DDS hose adapter with 6 or 10 mm
diameter into the opening on the DDS secretion canister
lid twisting slightly to ensure a tight fit (see fig. 18).
• Twist slightly in the same manner when removing.
4.3.3.12 Connect hose
• Fix the hose tightly to the adapter (olive) (see fig. 19).
Advertisement
Table of Contents
