Rekluse RadiusX FTR 1200 Installation & User Manual page 22

Table of Contents

Advertisement

A Rekluse auto-clutch can make your motorcycle appear
to be in neutral when in gear, even when the engine is
running and clutch lever released.
Motorcycles equipped with a Rekluse auto-clutch can
move suddenly and unexpectedly and cause riders to
lose control. To avoid death, serious injury, and/or
property damage, always sit on the motorcycle to start
it.
a) Before you begin, place
the vehicle in NEUTRAL,
start the engine and let it
warm up for 2-3 minutes
to idle down and warm
the engine oil.
b) Stretch the included
rubber band between
your thumbs, then place
the top end of the rubber
band on the outer end of
the left handlebar grip.
c) While holding the top
end of the rubber band
against the handlebar,
stretch the band
downward, then loop it
through itself.
d) Pull the band through the
loop, then attach it to the
outside end of the clutch
lever. This will take up the initial free play (slack) and put
the lever in a position to detect the Free Play Gain.
Pg. 22
Doc ID: 191-6216200A
Doc Rev: 081720

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RadiusX FTR 1200 and is the answer not in the manual?

This manual is also suitable for:

Radiusx ftr 1200 s

Table of Contents