Check Free Play Gain; Learn How To Check Free Play Gain - Rekluse RadiusX FTR 1200 Installation & User Manual

CHECK FREE PLAY GAIN

It is very important that you understand how to verify the correct
installed gap by checking Free Play Gain. The installed gap is
what allows the auto function of the product to perform properly.
Correct Free Play Gain = Correct installed gap
Setup, break-in, and rechecking the installed gap is CRUCIAL.
Failure to properly maintain your installed gap can result in
premature wear or failure of your clutch. Use the following steps
to verify the installed gap by checking Free Play Gain.
Failure to check and verify Free Play Gain can cause
failure or damage to this product. Setting the correct
installed gap is critical for clutch performance.

Learn how to check Free Play Gain

If you are familiar with checking Free Play Gain, check for
Free Play Gain then skip to the "Adjust the Installed Gap"
section.
If Free Play Gain is new to you, follow the instructions below
to help you learn this important step. You can also view the
video entitled "How to Check Free Play Gain" on our website
at https://rekluse.com/support/videos.
Checking Free Play Gain allows you to externally monitor
the installed gap so you can know when to make an
adjustment if the installed gap is too large or too small.
The correct installed gap is verified by observing and feeling
the increased free play movement in the clutch lever. This
extra movement is called "Free Play Gain."
Pg. 19
Doc ID: 191-6216200A
Doc Rev: 081720