Section 8 − Maxstar 210 Operation; Maxstar 210 Controls - Miller Dynasty 210 DX CPS Owner's Manual

SECTION 8 − MAXSTAR 210 OPERATION

8-1. Maxstar 210 Controls

1
7
HF START
8
.
For all front panel switch pad controls:
press switch pad to turn on light and en-
able function.
.
Green on nameplate indicates a TIG
function, Gray indicates a Stick func-
tion.
1 Standby Switch
Use to put machine into low power
consumption mode.
.
This button can also be used to clear
some errors. See Section 12-3.
2 Amperage Adjustment Control
Use control to change preset amperage
value. If a remote control is used, preset am-
perage value is the maximum amperage out-
put available. This control also functions as
a parameter change control while in the
menu mode (see Section 8-2 thru 8-5).
OM-270536 Page 44
.
A complete Parts List is available at www.MillerWelds.com
4
LIFT ARC
Schedule 2
Schedule 1
3 Memory Card Port And Indicator
This port is used to add features to the ma-
chine and update software to the boards
within the machine, Indicator is lit while card
is being accessed.
4 Volt Meter
Displays actual voltage when voltage is
present at the weld output terminals. It is also
used to display parameter descriptions
while in the menu.
5 Ammeter
Displays actual amperage while welding and
preset amperage while idle. It is also used to
display parameter selection options while in
the menu.
3 5
2
6
6 Menu Button
Press button to scroll through available
parameters for the selected process. Hold
button at desired parameter to enter set-up
mode (see Section 8-2 thru 8-5).
7 Output On Indicator
Blue indicator illuminates when output is on.
8 Process Selector Control
Use control to select one of the following pro-
cesses:
• DC TIG HF − Use for welding mild and
stainless steel. Non contact arc starting.
• DC TIG Lift − Use when HF could interfere
with surrounding equipment.
DC Stick (2 positions) − Used for welding
steels.
.
Two schedules allow the user to have
two sets of parameters active and easily
selectable at one time.
247218-C