Accessing Control Panel Menu: Dc Tig Hf And Lift Arc - Miller Dynasty 210 DX CPS Owner's Manual

8-2. Accessing Control Panel Menu: DC TIG HF And Lift Arc

2
HF START
Schedule 1
PPS
POST
.
A complete Parts List is available at www.MillerWelds.com
3
110A
Or
LIFT ARC
Schedule 2
110A
OFF
AUTO
1
4
Amperage Control:
Controls the welding amperage output. Limits the
maximum output of a remote amperage device.
[PPS]* Pulse Control:
Reduces heat input to minimize distortion and increase
travel speed. Set PPS (pulses per second). The range
is OFF−250 PPS. The Background Amperage and Peak
Amperage Time are not adjustable. Background Amper-
age equals 25% of Peak amperage. Peak amperage
Time equals 40%.
[POST] Post Flow Control:
Controls the length of time gas flows after welding
stops. Range is AUTO, OFF−50T (seconds). AUTO
calculates the time based on the maximum amperage
of each weld cycle. The minimum time is 8 seconds.
Auto equals maximum amperage/10.
*PRO−SET provides PROfessionally developed
SETtings for the weld process. To use PRO−SET,
press the menu button to display the parameter and
adjust the amperage adjustment control until PRO−
SET flashes on the display. PRO−SET flashes one
time and reveals the professional setting for the para-
meter.
1 Menu Button
Press Menu button to cycle through
parameters that can be set.
2 Parameter Display
3 Setting Display
4 Amperage Adjustment Control
Rotate amperage adjustment control
to adjust parameter setting.
.
Parameter automatically returns
to amperage setting 15 seconds
after amperage adjustment con-
trol is inactive.
247218-C
OM-270536 Page 45