Accessing Control Panel Menu: Dc Tig Lift Arc - Miller Dynasty 210 DX CPS Owner's Manual

9-2. Accessing Control Panel Menu: DC TIG Lift Arc

2
Schedule 1
LIFT ARC
Schedule 1
NOT
.
STR models have no DC TIG Lift Arc menu selection.
[NOT] [VALD] is displayed when Menu button is pressed.
OM-270536 Page 50
.
A complete Parts List is available at www.MillerWelds.com
3
4
150A
Schedule 2
LIFT ARC
Schedule 2
VALD
1 Menu Button
Press Menu button to cycle through
parameters that can be set.
2 Parameter Display
1
3 Setting Display
4 Amperage Adjustment Control
Rotate amperage adjustment control
to adjust parameter setting.
.
Parameter automatically returns
to amperage setting 15 seconds
after amperage adjustment con-
trol is inactive.
271723-B