Static Characteristics; Environmental Specifications - Miller Dynasty 210 DX CPS Owner's Manual

4-6. Static Characteristics

The static (output) characteristics of the welding power source can be described as drooping during the SMAW and GTAW processes. Static
characteristics are also affected by control settings (including software), electrode, shielding gas, weldment material, and other factors. Contact
the factory for specific information on the static characteristics of the welding power source.

4-7. Environmental Specifications

A. IP Rating
B. Temperature Specifications
Operating Temperature Range*
14 to 104°F (−10 to 40°C)
*Output is derated at temperatures above 104°F (40°C).
C. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC61000-3-11 and IEC 61000−3−12 and can be connected to public low-voltage systems provided that the public
low-voltage system impedance Z
It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that
the system impedance complies with the impedance restrictions.
D. China EEP Hazardous Substance Information
Ö
Component Name
( )
(if applicable)
Ö
Brass and Copper Parts
Coupling Devices
Switching Devices
Ö
Cable and Cable
Accessories

Batteries
SJ/T 11364
This table is prepared in accordance with China SJ/T 11364.
O:
Ö
Indicates that the concentration of the Hazardous Substance in all homogeneous materials of the part is below the relevant threshold of China
GB/T 26572.
X:
Ö
Indicates that the concentration of the Hazardous Substance in at least one homogeneous material of the part is above the relevant threshold of
China GB/T 26572.
The EFUP value of this EEP is defined in accordance with China SJ/Z 11388.
.
A complete Parts List is available at www.MillerWelds.com
This equipment is designed for outdoor use.
at the point of common coupling is less than 52 mW (or the short−circuit power S
max
  ‡
China EEP Hazardous Substance Information
Hazardous Substance
Pb Hg
X O
X O
O O
X O
X O
.
GB/T26572
GB/T26572
  ‡
IP Rating
IP23
Storage/Transportation Temperature Range
−4 to 131°F (−20 to 55°C)
×
Cd Cr6
O O
O O
X O
O O
O O
Å .
.
SJ/Z11388 .
IP23 2017−02
Temp_2016- 07
is greater than 3.1 MVA).
sc
ce-emc 1 2014-07
l
PBB PBDE
O O
O O
O O
O O
O O
EEP_2016−06
OM-270536 Page 17