Accessing Control Panel Menu: Dc Tig - Miller Dynasty 210 DX CPS Owner's Manual

6-3. Accessing Control Panel Menu: DC TIG

2
PPS
AUTO
POST
Notes
OM-270536 Page 34
.
A complete Parts List is available at www.MillerWelds.com
3 4
150A
OFF
1 Menu Button
Press Menu button to cycle through paramet-
ers that can be set.
2 Parameter Display
3 Setting Display
4 Amperage Adjustment Control
1
Rotate amperage adjustment control to adjust
parameter setting.
.
Parameter automatically returns to am-
perage setting 15 seconds after amperage
adjustment control is inactive.
Amperage Control:
Controls the welding amperage output. Limits the
maximum output of a remote amperage device.
[PPS]* Pulse Control:
Reduces heat input to minimize distortion and in-
crease travel speed. Set PPS (pulses per second).
The range is OFF−250 PPS. The Background Am-
perage and Peak Amperage are not adjustable.
Background Amperage equals 25% of Peak amper-
age. Peak amperage Time equals 40%.
[POST] Post Flow Control:
Controls the length of time gas flows after welding
stops. Range is AUTO, OFF−50T (seconds). AUTO
calculates the time based on the maximum amper-
age of each weld cycle. The minimum time is eight
247222-D
seconds. Auto = maximum amperage/10.
*PRO−SET: provides PROfessionally developed
SETtings for the welding process. To use PRO−SET,
press the menu button to display the parameter and
adjust the amperage adjustment control until PRO−
SET flashes on the display. PRO−SET flashes one
time and reveals the professional setting for the
parameter.