Table of Contents
Advertisement
Consumable Supplies
The term "consumable supplies" implies parts that are predicted to be worn, deteriorated,
changed in appearance, or broken when used. The warranty clauses for repair or replacement
shall not apply to those parts, and the repair or the replacement shall be charged.
（※The degree or timing of wear, deterioration, and breakage differ depending on the
environment and/or conditions at the place where customers use the product.）
In addition, customers can replace the following parts by themselves.
（In this case, the customers do not need to bear the basic charge and the technical fee, but
customers are asked to bear the shipping charges separately. If you do not understand the
replacement procedures, contact your nearest dealer or our company directly.）
If the product is subjected to significant wear or deterioration or should it be broken,
inspection or part replacement is necessary. If this is the case, immediately contact the
dealer or out company directly.
Consumable Supplies (The following parts are not warrantable and the cost will be charged.)
□Water‑supply bottle □Water‑supply cap □Drain tank □Flexible hose
□Cap joint N □Power cord □Caster □TAKARA deionizer □Deionizer cartridge
Optional Items
(The optional items are not warrantable and the cost will be charged.
※Including the accessories)
□Open mist ball nozzle □Aromatherapy Diffuser Holder □Mist cap
□Flexible hose holder □Turban
Guidance on Daily Inspection
Be sure to perform daily inspections according to this Guidance. Continued use of the machine
without performing daily inspections may result in machine failure or accidents.
To ensure safe use of the product, the following inspections must be performed.
■Items to be inspected on a daily basis (Inspection before starting the work)
Inspection Item
□Check that there is no
deformation, breakage or
deterioration on the power
plug and the power cord.
□Check that there is no breakage
or deterioration on the
exterior parts.
WARNING
Inspection Procedures
Check before operating the product:
□Check that there is no deformation,
breakage, or deterioration on the
power plug and the power cord.
Check during product operation:
（The check is limited to the case where
the power plug and the power cord are
not deformed, broken, or deteriorated.）
□When the power plug or the power cord
is deteriorated, it generates heat.
While operating the product, give a
tactile check that the power plug and
the power cord are not generating heat.
Take a look of the entire part of
product, and check that the exterior
parts, etc., are not broken or
deteriorated.
28
(Including Options)
Possible hazard when the
inspection revealed NG
There is a possibility of electric
shock hazard or burn due to fire or
electric leakage. Since the parts
need to be replaced, immediately
stop using the machine, turn off the
power switch, disconnect the power
plug, and then immediately contact
the nearest dealer or our company
directly.
There is a possibility that the
problem may result in accidents
(physical injuries such as burn)
since the original functions of the
product are not fulfilled.
Immediately turn off the power
switch, disconnect the power plug,
and immediately contact the nearest
dealer or our company directly.
Advertisement
Table of Contents
