1. Manuals
  2. Brands
  3. Takara Belmont Manuals
  4. Spa Accessories
  5. YUME SWING
  6. Operating manual

Takara Belmont YUME SWING Operating Manual

Hide thumbs Also See for YUME SWING:
Table of Contents

Advertisement

Quick Links

Download this manual
Takara Belmont Shampoo Unit
■Yume Swing (Reverse Slide Layout Spec.)
○Basin Unit
EX-YMSBXYM2 (Yume Basin, Reverse Slide Spec.)
○SWING Arm
EX-YMSAF2 (Front Layout, Reverse Slide Spec.)
EX-YMSAR2 (Rear Layout, Reverse Slide Spec.)
○Plumbing Cover
EA-YMSPK2 (Wall mounted plumbing, Reverse Slide Spec.)
EA-YMSPY2 (Under the floor plumbing, Reverse Slide Spec.)
EA-YMSPU2 (Above the floor plumbing, Reverse Slide Spec.)
This product is designed for shampooing and hair/scalp care.
Please contact the nearest dealer or Takara Belmont directly in case
your operating manual is unreadable due to being soiled or ripped.
Thank you for purchasing this Takara Belmont product.
The instructions contained in this operating manual should be thoroughly read and understood before use.
Using this product before reading this manual may result in an accident. This product is an industrial shampoo unit designed for hairdressing salons.
Only use this product for its intended purpose and do not use it for non-hairdressing work.
Keep this manual and refer back to them when required.
YUME SWING
for Reverse Slide Layout
Operating Manual
Basin Unit
SWING Arm
(Image is of EX-YMSBXYM2/EX-YMSAR2/EA-YMSPY2)
Plumbing Cover
1

Table of Contents

Version 4
2
2
5
8
8
9
9
9
10
11
12
14
17
23
30
30
31
31
31
32
32
32
33
34
2022.09

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the YUME SWING and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Takara Belmont YUME SWING

Summary of Contents for Takara Belmont YUME SWING

  • Page 1: Table Of Contents

    Procedures for Daily Inspections This product is designed for shampooing and hair/scalp care. Please contact the nearest dealer or Takara Belmont directly in case your operating manual is unreadable due to being soiled or ripped. Thank you for purchasing this Takara Belmont product.

  • Page 2: Description Of Warning Symbols

    These precautions are important for ensuring safety. Adhere to these precautions at all times. Takara Belmont is not responsible for any damage or risk to the person using this product or those around them due to accidents if this product is used without adhering to the “Safety Precautions”...
  • Page 3 Warning Do not lean on the basin. Install on a stable area. Leaning on the basin while shampooing etc., may Install the main unit on a flat, firm floor, and fix it cause the basin to fall over or rotation arm to securely.
  • Page 4 Do not use this product with the cover broken. Do not use outdoors. Contact the nearest dealer or Takara Belmont directly to replace the cover if it breaks. This product is designed for indoor use. Do not Continuing to use this product with a broken cover install this product outdoors or within a vehicle.

  • Page 5: Precautions For Use

    Precautions for Use Caution Do not wipe with chemicals or apply heat. Close the tap firmly. Failure to follow this instruction may cause After use or shampooing is complete, turn the tap deformation or discoloration. If chemicals adhere firmly in a clockwise direction and turn the water on to the covers, wipe them dry as soon as off...
  • Page 6 Caution Do not leave the dual function shower Do not wet the shower head holder with water. head immersed in water. Do not wet the shower head holder with water. If pressure in the water pipes decreases due to Failure to follow this instruction may cause water repairs that follow water stoppages, the water in leakage.
  • Page 7 Caution Do not slide the basin swiftly. Check the position of the basin and SWING arm before rotating the chair. Slide the basin gently, paying attention to avoid hitting people or objects. Depends on the fixed position of the chair, foot When it is slid over its limit, rotation is locked.

  • Page 8: Position Of Warning Labels

    Position of Warning Labels ＣＡＵＴＩＯＮ Drain Outlet Drain Cap The drain cap must be detached from the drain outlet when the product is not in use. Name of Parts <YUME Basin> Head Pillow Neck Cushion Thermostatic Basin Shower head holder Control Knob Plumbing Cover Dual function...

  • Page 9: Accessories

    Accessories * Confirm that all of the following parts are coming with product □ Sponge (1) □ Drain Cap (1) □ Hair Catcher (1) □ Mohair Tape (Spare) (1) □ Neck Cushion (1) □ Head Pillows (1 pair) □ Operating Manual (1) □...

  • Page 10: Precautions For Resin (Plated) Parts

    Precautions for Resin (Plated) Parts ・ Resin plating is used for the tap and the thermostatic control knob. ○ Plating in a thin and hard metal film applied to the surface that may crack or peel due to corrosion or aged deterio- ration.

  • Page 11: Types Of Layout And Standard Positions

    Types of Layout and Standard Positions There are two types of layout for this product, “Front Layout” and “Rear Layout”. Check the “Initial Position” and “Shampooing Position” from the illustrations shown below. ■Front Layout <Initial Position> <Shampooing Position> Wall Wall Slide Mirror &...

  • Page 12: Preparation

    The neck cushion and head pillows are consumable supplies. Replace them if they are extremely dirty or the surface has deteriorated. (available at additional cost) To replace the neck cushion and head pillows, contact the nearest dealer or Takara Belmont directly.
  • Page 13 ■Remove the Cover Turn the cover counterclockwise. Turn the cover around 5 degrees. Cover Pinch the front and back of the cover to deform and remove the catch. 【Image】 Catch Caution Do not remove the cover of holder forcibly. Failure to follow the instruction may cause damage the product. ■Sponge Installation Attach the sponge to the shower hose.

  • Page 14: How To Use

    ・If the drainage becomes sluggish, immediately stop using the product, and contact the nearest dealer or Takara Belmont directly. The drain pipe may be clogged with dirt, resulting in water leakage of the inside of the product.
  • Page 15 Depends on the environment or condition that it is used in, the product may have the following conditions. If adjust- ment or replacement is required, contact the nearest dealer or Takara Belmont directly. ・A gushing sound may be emitted from the basin unit. (Adjustment is required.) This sound is due to water flowing fast through pipes as a result of high water pressure or water volume control, and is not indicative of a defective product.
  • Page 16 ■To fill up basin with hot water To fill the basin with water, rotate the drain cap in <Filling the basin> the clockwise direction to close the drain outlet. The amount of water should be below the level shown by the dotted line in the illustration below (just below the shower hose slot).

  • Page 17: Guiding Clients

    Guiding Clients ■Specifications of this product There are 2 combinations available for this product. YUME basin Front Layout Rear Layout YUME basin ■Sliding the basin unit When sliding the basin unit, hold the edge of the basin and slide it. Basin unit is locked at initial position and at shampooing position.
  • Page 18 Unlock the chair rotation after the client seats on the chair, and rotate it to the shampooing position. *Refer to the Operating Manual of each chair to know how to unlock the chair rotation. Rotate Chair Yume Rotate Basin Chair YUME Basin ＜Image of Front Layout＞...
  • Page 19 When reclining the backrest of the chair, support client’s head by your hand. *Refer to the Operating Manual to know how to recline the chair backrest. Chair YUME Basin Recline Recline Chair YUME Basin ＜Image of Front Layout＞ ＜Image of Rear Layout＞ Basin Note Backrest...

  • Page 20: Head Pillows (1 Pair)

    Check that the client’s face angle is horizontal. If this is not the case, ask the client to move upward or downward in order to adjust the face angle. 【Measure】 1-2 cm from ear lobes Face angle : Horizontal Head Pillows Backrest Neck Cushion When necessary, move the chair upward or downward in order to adjust the backrest height. *Refer to Operating Manual of each chair to know how to raise and lower the chair.
  • Page 21 Hold the edge of the basin and slide basin unit to the initial position. Chair YUME Basin Slide Slide Chair YUME Basin ＜Image of Front Layout＞ ＜Image of Rear Layout＞ Caution ・When sliding the basin unit, hold the basin with both hands and lock the basin slowly around the area of initial position and shampooing position.
  • Page 22 After shampooing, wipe off any moisture. ＜Moisture attached to the basin cover and ＜Moisture dropped on the floor through shower hose＞ external parts of the basin＞ ＜Moisture attached to the rotation arm cover, plumbing cover and caster rail＞ Caution After use, be sure to wipe off any moisture from all parts other than the basin. Leaving the product with water drops may result in failure of the product or any contamination will not be removed.

  • Page 23: Care And Maintenance

    ・If scratching or damage appears on resin or plated parts such as the tap and thermostatic control knob, then immediately suspend use, and contact the closest dealer or Takara Belmont. Failure to suspend use may result in peeling plating or damage, leading hand injuries.
  • Page 24 ■Basin Wipe any dirt clean using detergent diluted with water. If streaked scratches appear due to contact with metallic objects such as watch bands, rub the area with a nylon scourer. Caution Around the metal fittings Do not use a metallic scourer or sandpaper, as this will damage the basin.

  • Page 25: Sponge

    ■Sponge Sponge is consumable supply. Replace the sponge if degradation causes rubbing sound Cover when the hose is moving. (Available at additional cost) Remove the cover from the holder. [Page 13] ・Remove the sponge from the hose and wash with water. ・After washing the sponge with water, squeeze it like Sponge pressing with both hands.

  • Page 26: Drain Cap

    ■Basin body <Drain cap> Drain cap Wash around the drain cap, and remove any hair or dirt from chemicals. The drain cap is a consumable supply. Replace the drain cap if degradation causes water to leak quickly when the basin is filled with water. (available at an additional cost) Drain cap Gasket Caution...
  • Page 27 If this is the case, contact the nearest dealer Remove or Takara Belmont directly. With cloth, cover the floor around the water and hot water supply pipes. *Be careful of the rotation arm cover when doing this procedure.
  • Page 28 ・ Check that water is not leaking on the floor where installing SWING arm. If there is water leakage, the basin unit or pipes in the rotation arm may be damaged, so contact the nearest dealer or Takara Belmont directly.
  • Page 29 Subject to its original feature, after a period of use, it may cause degradation of the surface. Caster * Caster and caster rail are consumable supplies. If they are extremely dirty or deteriorated, refer to “Consumable Supplies” and contact the nearest dealer or Takara Belmont directly.

  • Page 30: Daily Inspections

    Daily Inspections ● To ensure that this product can be used for a long period of time, follow the procedures outlined in “Procedures for Daily Inspections” on page 34 to 35 of this operating manual. Always inspect this product following the procedures outlined in “Procedures for Daily Inspections”.

  • Page 31: Parts Replaced On A Regular Basis

    (The parts are available at additional cost.) Our company will not assume responsibility for any harm, damage, or defects attributed to any part that was not replaced within the designated period. For ordering replacement work, contact your local Takara Belmont dealer. Standard Duration of Use The standard period of use of this product is seven years.

  • Page 32: Disposing Of This Product

    ・Difference between hot water supply pressure and water supply pressure: Within 0.2MPa (2kgf/cm Weight EX-YMSBXYM2 + EX-YMSAR2 + EA-YMSPY 61kg *For details of the hot water supply temperature, hot water/water supply pressures, see the Yume Swing installation manual for reverse slide layout.

  • Page 33: Dimensions

    Dimensions [Unit: mm] <Overview Diagram> *The illustrations show the spec. of H height and under the floor plumbing. ■Front Layout 1348 1175 Center of rotation Initial position Shampooing position Basin:EX-YMSBXYM2 (YUME Basin, Reverse Slide Spec.) Arm:EX-YMSAF2 (Front Layout, Reverse Slide Spec.) *Height from floor to neck cushion differs slightly from product to product.

  • Page 34: Procedures For Daily Inspections

    Procedures for Daily Inspections To ensure that this product can be used for a long period of time, conduct the inspections below. When repair is necessary, contact the nearest dealer or Takara Belmont directly. ■ Inspect the product every day...

  • Page 35: Mohair Tape" Manual

    Close the stop valves of the water / hot water supply pipes (Refer to pages 26 to 28.), immediately stop using the product and contact the nearest dealer or Takara Belmont directly. ■Items that must be inspected once each week Inspectionitem...
  • Page 36 TAKARA BELMONT CORPORATION 1-1, 2-Chome, Higashi-shinsaibashi,Chuo-ku,Osaka,Japan TEL : +81-6-6213-5945 FAX : +81-6-6212-3680 Printed in Japan 1E04ZTB0...

Table of Contents