Table of Contents
Advertisement
Before fixing the machine, be sure to disconnect
the power plug from the wall outlet.
Power plug
The control panel or the metallic parts may
become inoperable or rust when exposed to water.
When this is the case, immediately wipe the water
off with a dry soft cloth or the like.
Soft cloth
The parts are not resistant to
moisture and water.
When chemical agents, such as treatment, perm,
and color liquids adhere to the main unit,
immediately wipe them off with a cloth that is
immersed in a neutral detergent diluted with
water and tightly squeezed. Leaving such chemical
agents as they may cause stains
or discoloration
on the surfaces.
Never use materials such as volatile chemicals including thinner, alcohol, gasoline and kerosene oil,
as well as wax, sponges, or scrubbing brushes that contain abrasive compounds. Do not clean the inside
of the water‑supply bottle pan, water‑supply bottle, and inside of the drain tank using chemical agents.
Thinner
Fixing the Machine
Alcohol
Kerosene
oil
25
The plastic, plated, or painted parts should be
cleaned with a dry soft cloth
Soft cloth
When tough stains or oil content adhere, wipe
them off with a cloth that is immersed in a
neutral detergent diluted with water and tightly
squeezed.
Neutral
Hand wash the mist cap with a neutral detergent.
In addition, if chemical agents, such as color
agents adhere, immediately clean them with water.
Leaving such chemical agents as they may cause
stains or discoloration on the surfaces.
Wax
Soft cloth
Chemical
agents
Advertisement
Table of Contents
