Takara Belmont YUME ESPOIR Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Takara Belmont Manuals
  4. Spa Accessories
  5. YUME ESPOIR
  6. Operating instructions manual

Takara Belmont YUME ESPOIR Operating Instructions Manual

Hide thumbs Also See for YUME ESPOIR:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Instructions
YUME ESPOIR
Basin body
[For Back wash] Type
Seat body
[Fixed Legrest] Type
[Movable Legrest] Type
Seat
[Fixed Legrest] Type
[Movable Legrest] Type
Base plate
This product is designed for shampooing and hair/scalp care.
YUME ESPOIR
Translation of the original instructions
(Image is of "Fixed legrest" type)
(Image is of "Movable legrest" type)

Table of Contents

Thank you for purchasing this Takara Belmont product.
The instructions contained in this booklet should
be thoroughly read and understood before use.
Using this product before reading this operating
instructions may result in an accident.
This product is an industrial shampoo unit designed
for barbers and hair salons. Only use this product for
its intended purpose and do not use it for
non-hairdressing work.
Keep this instruction and refer back to them when
required.
1
2
2
7
9
9
10
11
12
12
13
15
21
25
31
32
32
33
33
34
34
34
35
37
Version 7
2021.11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the YUME ESPOIR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Takara Belmont YUME ESPOIR

Summary of Contents for Takara Belmont YUME ESPOIR

  • Page 1: Table Of Contents

    After-sales Service Specifications Dimensions Procedures for Daily Inspections Thank you for purchasing this Takara Belmont product. The instructions contained in this booklet should be thoroughly read and understood before use. Using this product before reading this operating instructions may result in an accident.

  • Page 2: Description Of Warning Symbols

    These precautions are important for ensuring safety. Adhere to these precautions at all times. Takara Belmont is not responsible for any damage or risk to the person using this product or those around them due to accidents if this product is used without adhering to the "Safety Precautions", "Precautions for Use"...
  • Page 3 Warning Do not climb on the seat. Stop using this product if it does not move, or if it feels like there is a Failure to follow this instruction may damage problem present. the seat, or cause Stop using this product if the seat does not injury.
  • Page 4 Warning Ground items properly. Disassembly and repairs/modifications are prohibited. Failure to follow this instruction may cause electric Disassembly shock if there is a malfunction or ground leakage. Disassembly, repairs and modifications must not Prohibited Contact a professional for grounding. (if an be conducted by people other than qualified repair extension power cable is used) technicians.
  • Page 5 Warning Periodically remove dust from the Return the water temperature to an power plug. appropriate position after using hot water. (if an extension power cable is used) Periodically remove any dust or dirt from the Return the water temperature to an appropriate power plug and power outlet.
  • Page 6 Caution Do not use outdoors. Do not use this product with the cover broken. This product is designed for indoor use. Do not install this product outdoors or within a vehicle. Replace the cover if it breaks. Continuing to use Be sure to only use this product inside a barber or this product with a broken cover may cause a hair salon.

  • Page 7: Precautions For Use

    Precautions for Use Caution Close the tap firmly. Do not wipe with chemicals or apply heat. After use or shampooing is complete, turn the Failure to follow this instruction may cause taps firmly in a clockwise direction and turn the deformation or discolouration.
  • Page 8 Caution If chemicals spill on to this product, Do not apply steam directly to the wipe them dry as soon as possible. leather. If chemicals such as hair dyes spill on to this When using the steamer to perform hair/scalp care product, wipe them dry as soon as possible.

  • Page 9: Precautions For Handling Synthetic Leather

    Precautions for Handling Synthetic Leather Handling precautions Stains caused by clothing dyes The synthetic leather of this product may become stained by direct contact with clothes or belts. If there is stains, wipe clean as quickly as possible with a 10% detergent solution diluted using water to prevent permanent staining. Take care of deformation or stains due to direct contact •...

  • Page 10: Name Of Parts

    Name of Parts Shower head Main body bracket Backrest Backrest Basin Seat Seat Main body cover (front) Base plate Legrest Foot control Power switch <For Back wash (same as YUME basin)> Neck cushion Backrest cover Head pillow Drain cap Thermostatic control knob Shower head Power switch Mohair tape...

  • Page 11: Precautions On Resin (Plated) Parts

    Check that there are no scratches, cracks, or peeling of the plated surface of the taps Caution before using the product. If peeling is observed, immediately stop using the product and contact your local Takara Belmont dealer. Continued operation may result in injuries. An example of peeling An example of scratches...

  • Page 12: Accessories

    Accessories • Drain cap...1 • Mohair tape for • Hair catcher...1 replacement...1 Sponge • Neck cushion...1 • Head pillow...1 set • Installation instructions...1 • Operating Instructions...1 • YUME SPA Technical Manual...1 Before Using This Product • The back wash (YUME) basin is a shampooing product designed for performing back shampooing or hair/scalp care.

  • Page 13: Preparations

    Preparations <Back wash (same as YUME basin)> Neck cushion Attach neck cushion Basin side (1) Align the neck cushion as shown in the illustration, and fit Snap button the neck cushion on the attachment fittings. (Make sure the attachment direction is correct.) Seat side The short edge faces the basin side...
  • Page 14 Remove the Cover Turn the cover anticlockwise. Turn the cover around 5 degrees. Cover Pinch the front and back of the cover to deform and remove the catch. 【Image】 Catch Do not remove the cover of holder forcibly. Caution Failure to follow the instruction may cause damage the product. Sponge Installation Attach the sponge to the shower hose.

  • Page 15: How To Use

    <Seat> Power Power switch Insert the power plug into a power outlet. (only if an extension power cable is used) Turn the power on. [OFF] [ON] The power switch is on the left of the seat when viewed from the basin.
  • Page 16 [How to set the preset position] The standard preset position is adjusted in advance when the product is shipped from the factory. To change the preset position, follow the procedure below to set the new position. 1. With the seat lifting/seat lowering switch, lift or lower the seat to the desired height to set as the preset position.
  • Page 17 Using the Dual function shower head Dual function shower head Dual function shower head Changing the selection switch position switches between Shower Mode and air Low Splash Foaming Mode. Selection switch Protrusion <Shower Mode> <Low Splash Foaming Mode> Press the switch on the Press the switch on the Shower head plate Shower head...
  • Page 18 If peeling is observed, immediately stop using the product and contact your local Takara Belmont dealer. Continued operation may result in injuries. - The tap may become stiffer when turned depending on the environment or condition that it is used in.
  • Page 19 Adjusting the water temperature Open (H) Hot 1) Turn the thermostatic control knob to H (hot) or C Thermostatic (cold) direction and stop it at the desired position. Control Knob Turning the tap toward left (anticlockwise) will Stop (C) Cold make the water hotter, and turning it toward right (clockwise) will make it colder.
  • Page 20 To fill up basin with hot water To fill the basin with water, rotate the drain cap in <Filling the basin> the clockwise direction to close the drain outlet. The amount of water should be below the level shown by the dotted line in the illustration below (just below the shower hose slot).

  • Page 21: Guiding Customers

    Guiding Customers <When shampooing> Check that the seat has returned to its initial position. Follow the procedure below to return the seat to its initial position. • Holding down (pressing for one second or longer) the seat lowering switch will make the unit "beep", then automatic mode will begin and the seat will return to the initial position.
  • Page 22 Holding down (pressing for one second or longer) the seat lifting switch will make the unit "beep", then automatic mode will begin to guide the customer to the fully-reclined position. Support the customer's head and place it gently onto the neck cushion. When lifting or lowering the seat, check and make sure that there are no people or obstructions near the seat.
  • Page 23 Shampoo the customer's hair Make sure that customers or other people do not touch the foot control while shampooing. Warning Carelessly operating the switch may cause injury. Shampooing style The user sits behind to the basin and shampoos from the rear. ESPOIR stool When operating the seat during shampooing, observe the following points while working.
  • Page 24 After use, wipe off any water on the product. Water on the main body cover or the Water dripping onto the floor via the shower hose outside surface of the basin After use, wipe water away from all parts other than the basin. Leaving the unit with water on it Caution may cause damage to the main body, and make dirt difficult to remove.

  • Page 25: Maintenance

    Maintenance Never use volatile chemicals such as thinners, alcohol, gasoline or kerosene, cleaning products such as wax with a scourer, a sponge with a scourer, detergents that include organic solvents, Caution acidic, alkaline or chlorine-based detergents, or scouring pads. Failure to follow this instruction may cause scratches or discolouration.
  • Page 26 Basin Wipe any dirt clean using detergent diluted with water. Around the If streaked scratches appear due to contact with metallic objects such attachment tools as watch bands, rub the area with a nylon scourer. Do not use a metallic scourer or sandpaper, as Caution this will damage the basin.
  • Page 27 Sponge Cover Sponge is consumable supply. Replace the sponge if degradation causes rubbing sound when the hose is moving. (Available at additional cost) Sponge Remove the cover from the holder. [Page 14] - Remove the sponge from the hose and wash with water. Sponge holder - After washing the sponge with water, squeeze it like press- ing with both hands.
  • Page 28 Shower head Dual function shower head Dual function shower head Shower head O-ring Rotate and detach the shower head plate and remove the three parts Rubber gasket (shower head plate, foaming water outlet, and rubber gasket). Counterclockwise: Do not detach the O-ring. Removed Clean the shower head plate Foaming water outlet...
  • Page 29 Drain cap Wash around the drain cap, and remove any hair or dirt from solvents. Drain cap The drain cap is a consumable supply. If it is extremely dirty, remove the gasket from the drain cap, wash with detergent solution diluted using water, and rinse carefully with water.
  • Page 30 Cover the floor around the water and hot Filtered check valve water supply pipe with cloth. Water Hot water supply pipe supply pipe - If there are electrical components such as wires nearby, ensure that water does not splash onto them. Stop valve Failure to follow this instruction may Caution...

  • Page 31: Daily Inspections

    Base plate <Cleaning the inside of the base plate> When cleaning the inside of the base plate, remove base plate F and clean inside. * Water may pool within base plate F. Leaving water pooling within the base plate may lead to corrosion or degradation, so clean the inside of the base plate every day.

  • Page 32: Before Requesting Repairs

    Before Requesting Repairs If the following problems arise, conduct the checks outlined before requesting repairs. Solution Symptom Check this • Turn the power switch on. (see l The seat, backrest or legrest does not → • Is the power turned on? page 15) move •...

  • Page 33: Parts Replaced On A Regular Basis

    Parts Replaced on a Regular Basis The following are parts that must be replaced on a regular basis as designated by our company: Drain hose: Replace every three years ・ For the drain hose, there is a possibility that water leaks will occur because cracks are caused due to deterioration and hardening of the hose from chemical agents in the drain water.

  • Page 34: Disposing Of This Product

    Disposing of this Product When disposing of this product or replaced parts, adhere with current regulations and dispose of them appropriately. After-sales Service To request after-sales service, contact your local Takara Belmont dealer. Specifications Basin body [For Back wash] Type...

  • Page 35: Dimensions

    Dimensions Overall layout diagram Basin body: Back wash type Seat body: Fixed legrest type Top view Hot water supply position Drain position Water supply position Side view 2950 (*2) or more 435 (*2) or more 1885 630 or more Wall Wall Lowest position Highest position...
  • Page 36 Overall layout diagram Basin body: Back wash type Seat body: Movable legrest type Top view Hot water supply position Drain position Water supply position Side view 2900 (*2) or more 450 (*2) or more 630 or more 1820 Wall Wall Lowest position Highest position Drain position...

  • Page 37: Procedures For Daily Inspections

    Procedures for Daily Inspections To ensure that this product can be used for a long period of time, conduct the inspections below. Inspect the product every day Inspection item Inspection method If the inspection results show defects Does the basin, Slowly push the rear end of the basin, Rattling may cause incorrect operation or damage backrest or seat...
  • Page 38 Inspection item Inspection method If the inspection results show defects Is there any oil Check that there is no oil around Oil may be leaking from the hydraulic cylinder. leaking? the bottom of the seat base cover. Stop using the product immediately. Is there any water Check that there is no water on Water leaks may cause malfunctions to the main body,...
  • Page 39 If the inspection results show defects Is the drain blocked? Check that the drain is not blocked Remove the object that is blocking the drain. If the with the drain cap, towel or drain is blocked, water that is turned on shampoo cloth.
  • Page 40 Machinery Directive : 2006/42/EC and RoHS Directive : 2011/65/EU based on category 11 of Annex I. Product : BEAUTY SHAMPOO CHAIR Model : YUME ESPOIR The product has been designed and manufactured in accordance with the European standards as the listed in the Declaration of Conformity.

Table of Contents