Using The Aromatherapy Diffuser Holder (Option) - Takara Belmont SPA MIST II AK-160 Operating Instructions Manual

Mist processor
Table of Contents

Advertisement

Using the Aromatherapy Diffuser Holder (Option)
※To use the Aromatherapy Diffuser Holder, the Open mist ball nozzle (option) is necessary.
Use the holder under the open mist mode.
Preparation
Detach the lid of the Aromatherapy
Diffuser Holder.
Apply several drops of aromatherapy oil on
the Aromatherapy diffuser pad.
Be careful that the aromatherapy oil will not attach to places other than the Aromatherapy
diffuser pad. If it does accidentally, immediately wipe it off. Ignoring this precaution will
CAUTION
result in breakage of the machine from corrosion or cracking.
Operation Procedure
Insert the Aromatherapy Diffuser Holder into the Open mist ball nozzle.
Open mist
ball nozzle
How to attach/detach the Flexible Hose Holder (Option) 
How to attach
Insert the rubber end of the Flexible Hose into the
mouth ring of the Flexible Hose Holder.
Mouth ring
Insert the Flexible Hose into the mist nozzle of the
main unit, with the Flexible Hose Holder attached.
If you attach/detach the Flexible Hose Holder with the Flexible Hose already installed to the
main unit, the mouth ring of the Flexible Hose Holder will get extra pressure and will stretch
CAUTION
out and will not be able to firmly hold the Flexible Hose.
Lid
Aromatherapy
Diffuser Holder
Information
If the Flexible Hose is
hard to insert, apply
water to the inside of
the hose, which will make
your work easier.
Insert the Aromatherapy diffuser pad into the lid.
Close the lid tightly.
Information
If the Aromatherapy Diffuser Holder is
hard to insert, apply water to the
inside of the holder, which will make
your work easier.
How to detach
Pull out the Flexible Hose from the mist nozzle,
with the Flexible Hose Holder attached.
Slant the Flexible Hose a little and pull it
out from the Flexible Hose Holder.
24
Aromatherapy diffuser pad

Advertisement

Table of Contents
loading

Table of Contents