Table of Contents
Advertisement
Quick Links
Reclining Chair for Beauty Salon Use
AE-A81A
Model No.
Operation Manual
Thank you very much for purchasing a Takara Belmont
product.
Be sure to read through this operation
manual carefully before use, and
operate the product correctly.
This motorised reclining chair is for beauty salon use
only. Do not use it for any other purposes.
After reading through this manual, keep it safe within
reach of the chair operator and refer to it whenever
necessary.
If this operation manual is lost or becomes unreadable due to tearing or smears,
please ask us to send a new one.
Contents
with a customer sitting in the chair
predetermined positions with a customer
sitting in the chair
2
5
6
7
8
9
10
11
11
12
13
14
15
16
16
17
18
18
19
20
21
2023-09 (2nd edition)
1E00J5BE (BOOK No.)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Takara Belmont ESTHE PLACE
Summary of Contents for Takara Belmont ESTHE PLACE
-
Page 1: Table Of Contents
Using the height-adjustable service tables Using the heaters Using the built-in sockets Cleaning Instructions Daily Inspection Instructions Thank you very much for purchasing a Takara Belmont Troubleshooting product. Specifications Be sure to read through this operation manual carefully before use, and Disposal Instructions operate the product correctly. -
Page 2: Warning And Caution For Safety
Warning and Caution for Safety ■ Safety precautions ● Before use Be sure to carefully read through the safety precautions before use so that you can operate the product correctly. Purpose and classification ● These precautions are intended to ensure safe use of the product and protect you and others from injury or damage. - Page 3 • If the connection becomes loose, immediately stop using the equipment attached to the built-in socket and unplug the equipment from the built-in socket. Contact your nearest dealer or Takara Belmont as soon as possible for inspection or replacement parts. • Remove the power plug of a device from the built-in socket when not using it.
- Page 4 If the breaker (the power switch) trips frequently, After using the chair, turn off the power ● ● contact the dealer or Takara Belmont. switch. Do not place any objects on the power cord. ● ●...
-
Page 5: Precautions For Use
Precautions for Use At the end of business hours, recline the backrest. ● At the end of the day, return the seat to the lowest position and fully recline the backrest. This positioning maximises the chair’s service life as it imposes the least load on the springs and cylinders. Do not wipe the chair with chemicals or apply heat to it. -
Page 6: Warning Label Locations
Warning Label Locations Hand pinch warning sticker ■ WARNING Be careful not to pinch a hand and et... -
Page 7: Part Names
Part Names Built-in socket Headrest Backrest Height-adjustable Heater switch service tables Seat Built-in socket Service table operation button Legrest Chair body Footrest Power switch Built-in socket Power plug Power cord Foot control Headrest Headrest operation lever Built-in socket Headrest operation button Height-adjustable service table Chair body Service table operation button... -
Page 8: Preparation
Preparation ■ Power supply Socket Inserting the power plug into a socket (with earth terminal) ● Use an unshared outlet that has an attached Power plug ground terminal and matches the rated voltage and current *of this product. Using the same outlet together with the power plug of other devices can result in abnormal heat generation and possible fire. -
Page 9: Operating Instructions
Operating Instructions ■ Operating the foot control All the switches to move the chair parts are on the foot control. Before operating the chair, make sure that the foot control is connected to the chair body. (4) Preset switch B (Positioning for body care) (4) Preset switch F (5) Auto-return switch... -
Page 10: Operating The Multi-Functional Headrest
■ Operating the multi-functional headrest Before letting a customer sit in the chair, set the headrest in place, depending on the type of service to be provided. Headrest Pulling up the headrest 1. Hold the headrest and pull it up. ●... -
Page 11: Before Letting A Customer Sit In The Chair
■ Before letting a customer sit in the chair Hold down the auto-return switch on the foot control for at least 1 sec. to Auto-return switch return the chair to the initial position. ● Be attentive to the customer when he/she CAUTION places his/her foot on or off the footrest, which sags slightly. -
Page 12: When Having A Customer Lie Flat
■ When having a customer lie flat Adjust the headrest position beforehand (see page 10). Reclining the backrest Step on the lower side of the BACK switch on the foot control to recline the backrest. While you are holding it down, the backrest will keep reclining. BACK switch (lower side) ●... -
Page 13: Shockless Motion
Lowering the legrest Step on the lower side of the LEG switch on the foot control to lower the legrest. While you are holding it down, the legrest will keep going down. LEG switch (lower side) WARNING ● Before lowering the legrest, make sure that there is no person (or animal) underneath it. Raising the backrest Step on the upper side of the BACK switch on the foot control to raise the backrest. -
Page 14: Bringing The Chair Parts To Their
■ Bringing the chair parts to their predetermined positions with a customer sitting in the chair Using the preset function (switches F and B on the foot control) What is the preset function? ⇒ It automatically brings the chair parts to their preset positions when you hold down the preset switch F or B on the foot control for at least 1 sec. -
Page 15: Using The Height-Adjustable Service Tables
Using the auto-return function (switch R on the foot control) It automatically returns the seat height, the backrest angle, and legrest position to What is the auto-return function? ⇒ the initially set positions when you hold down the auto-return switch (R) on the foot control for at least 1 sec. -
Page 16: Using The Heaters
• If the connection becomes loose, immediately stop using the equipment attached to the built-in ● socket and unplug the equipment from the built-in socket. Contact your nearest dealer or Takara Belmont as soon as possible for inspection or replacement parts. ●... -
Page 17: Cleaning Instructions
Cleaning Instructions Clean the chair after use to keep it clean. Before cleaning the chair, be sure to disconnect the power plug from the socket. ■ Cleaning precautions Plastic parts Synthetic upholstery parts Wipe them with a dry soft cloth. Wipe them gently with a dry soft cloth. -
Page 18: Daily Inspection Instructions
affect the chair’s functions. The noise will cease soon. If the problem persists after you have checked the points and tried the remedy given above, turn off the power immediately, disconnect the power plug, and contact your nearest dealer or Takara Belmont. -
Page 19: Specifications
Specifications Model No. AE-A81A Maximum load 135 kgf Load capacity of backrest and legrest: 60 kg Load capacity of height-adjustable service tables: 10 kg Weight 130 kg No. of built-in sockets 1500 W Maximum power capacity Temperature: 0 to 40°C Operating environment Humidity: 10 to 95% (No condensation) Atmospheric pressure: 700 to 1,060 hPa... -
Page 20: Disposal Instructions
Disposal Instructions When disposing of the chair or its replaced parts, follow the laws and regulations applicable at the time. -
Page 21: Daily Inspection Checklist
If the problem persists, contact check that the chair parts return to their initial positions (that allow the your nearest dealer or Takara Belmont. customer to get in and out of the chair) properly. □ Step on the SEAT switch and □... - Page 22 NOTE...
- Page 23 NOTE...
- Page 24 MANUFACTURER TAKARA BELMONT CORPORATION 2-1-1, Higashishinsaibashi, Chuo-ku,Osaka, 542-0083, Japan TEL : +81-6-6212-3523 / FAX : +81-6-6211-5745...
Need help?
Do you have a question about the ESTHE PLACE and is the answer not in the manual?
Questions and answers