Installing/Detaching The Mist Cap (Option) - Takara Belmont SPA MIST II AK-160 Operating Instructions Manual

Installing/Detaching the Mist cap
１ Practice using the shampoo bowl
※The customers who have the optional Open bowl nozzle are requested to see the description
on page 23.
Use either of the following:
The mist cap for YUME and open mist ball nozzle (EA‑CMC‑YB); or
The mist cap for rear shampoo and YUME (EA‑SMC‑RSW), according to the bowl you use.
Installing the mist cap
Lift the head of the customer, and overlap
１
the turban with the mist cap, and set it
under the head.
While lapping the rubber
３
portion of the mist cap
with the turban, put the
hook and loop fastener at
the right and left ends
together.
Hook and loop fastener
Information
To prevent mist leakage, be sure
to overlap the turban with the
mist cap tightly, and secure the
hook and loop fasteners without
allowing any gaps.
At this time, align the center part of the
turban with the rubber portion of the mist
cap and overlap them.
Adjust and fix the right
４
and the left fasteners,
one at a time.
Be careful not to
jam the customer's
CAUTION
hair into the
fastener.
16
While pulling the turban at both ends, attach
２
it to the forehead, and put the hook and loop
fasteners together.
Rubber portion
Turban
While pressing the stopper,
５
pull the string tight and
fix the stopper.
Fastener
Stopper
Information
To prevent mist leakage, be sure
to pull the string tight.
Mist cap