Operation Procedures - Takara Belmont SPA MIST II AK-160 Operating Instructions Manual

Operation Procedures( )
１
Insert the flexible hose into the exhaust nozzle.
Insert the flexible hose into the exhaust nozzle of the main unit.
※ When you have the optional Flexible hose holder, set the holder on the flexible hose in
advance by referring to the procedures shown on page 24.
Flexible hose holder (Option)
①
※ The optional Flexible hose holder will be
used for head spa, treatment, color, or perm
using the styling chair or the men's chair.
２
Set the main unit behind the customer.
As illustrated at the right, set the main unit
so that the flexible hose side
(exhaust nozzle side) can be positioned closer
to the customer.
・Be careful about interference with
other equipment.Ignoring this
precaution may damage other
CAUTION
equipment or cause physical injury.
・When the product is moved and the flexible hose or the exhaust
nozzle located at the root of the hose is held, the nozzle may be
damaged, resulting in machine failure. In order to move the product,
be sure to hold the handle behind the main unit
(See "Name of Each Part" on page 4).
CAUTION
・Do not move the product or expose it to vibrations while the product
is in operation. Ignoring this precaution may cause abnormal
operation of the machine.
３
Turn on the power.
Connect the power plug to the wall outlet.
Power plug
※ When the power is turned on, all lamps on the control panel will illuminate (for two seconds).
Then, the lamp for the mode selection key will blink to indicate the mode selection standby
state. At the same time, the operation to keep the water in the machine warm
(heat‑retaining mode) to prepare for the subsequent operation will be implemented.
②
Flexible hose
→
Power switch
For cases other than the cap practice, also
see the method for using the appropriate option.
Flexible hose
Exhaust nozzle
Flexible
hose
Exhaust
nozzle
Setup State (Styling chair)
Turn on the power switch.
11
Insert the flexible hose
fully to the end of the
exhaust nozzle.
Flexible hose
Exhaust
nozzle
Setup State (Shampoo bowl)
ON
OFF