Huawei FusionServer G5500 User Manual page 86

FusionServer G5500 Server
User Guide
5
6
7
8
Issue 02 (2017-12-15)
Figure 5-7 PuTTY Configuration
Set the login parameters.
The parameters are described as follows:
– Host Name (or IP address): Enter the IP address of the management network port,
for example, 10.10.1.104.
– Port: Retain the default value 30022.
– Connection type: Retain the default value SSH.
– Close window on exit: Retain the default value Only on clean exit.
NOTE
After you set Host Name (or IP address) and then Saved Sessions and click Save, you can
simply double-click the saved settings under Saved Sessions to log in to the server.
Click Open.
The PuTTY window is displayed. Then the message login as: is displayed, prompting
you to enter a user name.
NOTE
– If you log in to the server for the first time, the PuTTY Security Alert dialog box is
displayed. If you trust this site, click Yes. The PuTTY window is displayed.
– If the entered user name or password is incorrect during server login, PuTTY must be
connected again.
Enter the user name and password as prompted.
Run the following command to check that Product Name is MM510, which indicates
that the transparent transmission function is configured successfully.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the G5500
78