Huawei FusionServer G5500 User Manual page 122

FusionServer G5500 Server
User Guide
Procedure
Restart the server.
1
2
3
4
5
Issue 02 (2017-12-15)
On the virtual real-time desktop of the G560, click
Select Forced System Reset.
The system displays "Are you sure to perform this operation?"
Click Yes.
The server restarts.
Press Delete on the BIOS startup screen as shown in
Utility.
NOTE
– Press F2 to select the keyboard type (French or American keyboard).
– Press Delete to go to the BIOS Setup Utility.
From a remote serial port, you can press F4 to go to the BIOS Setup Utility.
– Press F11 to go the boot manager screen for selecting a boot device.
From a remote serial port, you can press F3 to go the boot manager screen for selecting a boot
device.
– Press F12 to boot from the network.
Figure 5-36 BIOS startup screen
During the startup, press Delete, F11 (go to a boot manager), or F12 (boot the server
over a network). No matter which method you choose, you need to enter the password in
the dialog box, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-37.
5 Configuring the G5500
on the menu bar.
Figure 5-36 to start the BIOS Setup
114