Huawei FusionServer G5500 User Manual page 126

FusionServer G5500 Server
User Guide
16 Select a boot option and press F5 or F6 to change the boot order.
17 Press F10.
18 Select Yes and press Enter.
Set the NIC PXE priority.
If there are multiple boot devices of the same type, you can configure the boot order. The following uses PXE
as an example. For details about setting other types of devices as boot options, see the
Purely Platform BIOS Parameter
19 Choose Advanced > PXE Configuration, and press Enter.
20 Select the network port to be configured and press Enter.
Issue 02 (2017-12-15)
The Boot Type Order screen is displayed.
NOTE
The default boot order is as follows: Hard Disk Drive, CD/DVD-ROM Drive, PXE, and Others.
– Press F5 to move a boot option down.
– Press F6 to move a boot option up.
NOTE
The server will boot in the order displayed.
The Exit Saving changes? dialog box is displayed.
NOTE
The PXE Configuration screen is displayed, as shown in
NOTE
The PXE Configuration screen provides PXE settings for two network ports and displays their
MAC addresses.
Figure 5-41 PXE Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Reference.
5 Configuring the G5500
HUAWEI Server
Figure 5-41.
118