Huawei FusionServer G5500 User Manual page 195

FusionServer G5500 Server
User Guide
No.
7
8
9
10
11
12
Issue 02 (2017-12-15)
Item Description
Hard disk The compute node supports a maximum of two 2.5-inch
hard disks (SAS, SATA, or NVMe SSDs). Mixed
configuration of HDDs and SSDs is allowed. Each hard disk
is hot-swappable and can be independently installed and
removed.
NOTE
Mainboard The mainboard holds the CPUs, DIMMs, hard disk interface
modules, power control module, iBMC, logic module,
chipset, and video adapter. The Intel® C620 chipset is used.
The video adapter is integrated in the iBMC HI1710 chipset
to provide a 32 MB display memory. The maximum
resolution is 1920 x1200 at 60 Hz with 16 M colors.
Hard disk tray Hard disk tray
CPU The mainboard supports two CPUs.
l The following CPU models are supported:
l Each CPU is integrated with a memory controller and
l Each CPU integrates a PCIe controller with 48 lanes and
l The two processors are interconnected through two
l The maximum frequency is 3.6 GHz.
NOTE
Mezzanine card Houses a mezzanine card.
tray
Mezzanine card The G530 V2 supports only one mezzanine card. The
mezzanine card provides two PCIe 3.0 x16 channels and is
connected to the mainboard through four connectors and to
the GP316 through the chassis backplane.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
In Legacy mode, the BIOS does not support 4Kn hard disks (which
have 4K bytes sectors in both the physical layer and logical layer).
Intel® Xeon® Scalable (Bronze 3100, Silver 4100, Gold
5100/6100, and Platinum 8100) series processors with up
to 165 W power, each supporting a maximum of 28
cores.
supports six DDR4 memory channels. Each channel
supports two DDR4 DIMMs of a 2400 or 2666 MHz
frequency.
supports PCIe 3.0.
UltraPath Interconnect (UPI) buses at 10.4 GT/s.
The G530 V2 does not support single-processor configuration, and
the two processors must be of the same model.
11 Specifications
187