Huawei FusionServer G5500 User Manual page 48

FusionServer G5500 Server
User Guide
When only one compute node is configured, select the slots (G530 V2-1 and GP316-1) on the left.
Step 3 Remove the G530 V2.
The half-width compute node configuration supports the removal of a single compute node. If the G530 V2-1
and GP316-1 are removed, the G530 V2-2 and GP316-2 can work properly, and vice versa.
1.
2.
3.
4.
5.
----End
Issue 02 (2017-12-15)
NOTE
NOTE
Press the unlock button on the G530 V2. See (1) in
Figure 3-8 Removing a G530 V2
Open the ejector lever on the G530 V2 completely. See (2) in
Pull the G530 V2 horizontally out of the chassis. See (3) in
Close the ejector lever on the G530 V2. See (4) in
Place the removed G530 V2 in an ESD bag.
NOTICE
An ESD bag can hold only one G530 V2.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Basic Operations
Figure 3-8.
Figure 3-8.
Figure 3-8.
Figure 3-8.
40