Table of Contents
Advertisement
4.14.2 Switching between Parallel Tests or Connections
This operation will be illustrated using the example of "Accepting an incoming call during a
BERT".
The ARGUS signals an incoming call both audibly and on the display (see page 44). The
incoming call can be accepted without influencing the currently running BERT. If either the
"B-channel loop" or the "BERT wait" function is active, the call will be accepted
automatically.
BERT outgoing
BERT active
The handset will be assigned to the currently active connection. The assignment
of the handset to a given connection is also retained in the background.
ARGUS PRI
or
4 Operation on a PRI Access
BERT is running.
While running a BERT, the ARGUS
displays information about an incoming
call.
Reject the incoming call.
<Reject>
The ARGUS will open the
BERT display.
Accept the call.
The BERT will continue in the background.
Mark "BERT outgoing".
Switch to BERT.
The connection remains active in the
background, the handset is assigned to
the connection.
69
Advertisement
Table of Contents
