Table of Contents
Advertisement
Setting
X.31 profile:
Packet number
TEI
LCN
Packet size
Agree Packet size Negotiate with the network side (DCE) regarding the data packet
Window size
Negotiate window
size
Throughput
Agree Throughput
ARGUS PRI
Explanation
Number of packets sent
Default setting: 10
Entry (from the keypad) of the TEIs (Terminal Endpoint Identifier)
to be used in the X.31 test. If you enter **, the ARGUS will
automatically select a TEI. Minimum 0 to a maximum of 63
Use the keypad to enter the LCN (Logical Channel Number) to
use in the X.31 test.
Default setting: 1
The size of the data packets
Default setting: 128 Bytes
size. If the desired data packet size is larger than the default, this
parameter should be set to "yes".
Default setting: No
Window size of Layer 3
Default setting: 2 Packets
Negotiate between the terminal (DTE) and the network (DCE) an
agreement regarding the window size.
Default setting: No
Data throughput in bits/sec
Default setting: 1200 bit/s
Throughput agreed
Default setting: No
4 Operation on a PRI Access
37
Advertisement
Table of Contents
