Intec ARGUS Manual page 58

4 Operation on a PRI Access
Display of the L1 Status in PRI Monitor mode
The L1 status function is only available in PRI Monitor mode. The Layer 1 alarms and
messages are presented in several windows and allow detailed assessments of the state of
the PRI access and the transmission line (For further information, see the CCITT/ITU
guidelines G.703 and G.704).
L1 state
58



The ARGUS in the PRI Monitor Mode
Monitoring is not active.














Display of the "NT-side parameters" 
Use the cursor keys to scroll through the
display
Switch to "L1 status TE"; the
<TE>
"TE-side parameters" will be
displayed
Reset the History function
<Reset>
Quit. 
The ARGUS will open the Main
menu.
ARGUS PRI