4.14.1 Starting Several Tests to Run Simultaneously
Starting a new test or connection during an existing connection
Start new one
Single Tests
Bit error rate test
Outgoing call
Open the
Connection display.
ARGUS PRI
4 Operation on a PRI Access
Example:
There is a connection on B-channel 1.
Open the Test Manager (can also be
opened by pressing the "6" on the
keypad).
Select desired test
(e.g. bit error rate test, BERT)
Start BERT, the connection is not yet
setup.
For information on running a BERT, see
page 27
Open the Test Manager.
Mark "Outgoing connection"
67