Intec ARGUS Manual page 46

4 Operation on a PRI Access
Disconnect

Displaying Advice of Charges (AOC)
If the charges are not given in units, rather directly as currency, the ARGUS will display the
current charges in currency. If, in DSS1, the call charges are not provided in accordance
with the DIN ETS 300182 standard, rather in the form of the information element DISPLAY
(DSP), the ARGUS will display the DISPLAY message's character string.
Note regarding the entry of the own call number
Separate the extension from the access number with a # (e.g. 02351 / 9070-40 is
entered on the ARGUS as: 023519070 #40). For an outgoing call, the ARGUS
uses the entire call number (without #) as the number called (CDPN or DAD) and,
for the calling number, only the extension (DSS1-CGPN or 1TR6-OAD).
A '#' at the beginning of a call number is treated as a valid character. A '#' at the
end of the own call number instructs the ARGUS to not send the caller's number for
outgoing calls (CGPN or OAD).

Simplified overlap signaling using the telephone key
depressed:
depressed again:
46
or
The ARGUS will open the Connection/Overlap window
directly regardless of the currently open menu.
A dial tone will be heard and once the call number is
entered, the call will be setup.
The connection is setup using 
B-channel 1.
Depending on the type of access
other information will be
displayed. 
- Subaddress of the caller (SUB) 
- Destination number
- User-User Information (UUI)
- Display Information
- Type of number (TON)
- Numbering Plan (NP)
- Units for charges
Setting the volume
<Volume>
Starts the Test Manager 
<TM>
(see page 66)
ARGUS PRI