4.3 Configuring the PRI Parameters
The following PRI parameters can be configured as needed. The procedure for configuring
a parameter will be illustrated with a single example: It is possible to restore the default
settings for the parameters (see the ARGUS main Manual).
Configuration
Protocol
Automatic
The ARGUS will use the marked
setting as the default and return
to the next higher menu.
ARGUS PRI
4 Operation on a PRI Access
The ARGUS - Main menu
Use the cursor keys to select, e.g.
Protocol.
Mark the desired protocol. The
selected protocol will be marked in
blue (in this example, Automatic).
The default protocol will be marked
in the display by a
will use the default protocol for the
PRI connection.
Open the next higher menu without
making any changes. The ARGUS
will continue to use the default
setting.
. The ARGUS
19