Configuration: Bert - Intec ARGUS Manual

4 Operation on a PRI Access

4.13.3 Configuration: BERT

The operation is the same for all configurations and will be illustrated with a single example:
Configuration
BERT
BERT time
Enter the BERT time
The ARGUS saves the 
settings and returns 
to the next higher menu.
Settings for the BERT:
Display Remark
Name on the
ARGUS
You can enter measurement times ranging from 1 minute (default
BERT time
setting) to 99 hours and 59 minutes (= 99:59).
This function is used to select the bit pattern to be sent cyclically by the
Bit pattern
ARGUS to perform a BERT on a PRI access (see "Bit patt. BRI/U"). 
PRI
(2
62
If the time is set to 00:00 (=BERT with unlimited measurement
time), the BERTwill not stop automatically. In this case, the
user must terminate the BERT (by pressing the
15
-1= default setting).

The ARGUS - Main menu 











Use the keypad to enter the duration of the
BERT.

The ARGUS will return to the
"BERT config." menu without
making any changes.




).
ARGUS PRI